M45 / MP62 Supercharger Upgrade Checklist

Up To 190 RWHP and 170 lb./ft. Torque
	Recommended	Mandatory	Details
Premium Gas			Run at least one tank full of premium gas through your car before the install. Stay away from "discount" gas suppliers. Major brands, like Chevron, Shell, etc. are better choices than discount places.
Fuel Filter			If your fuel filter is over 30 K miles old consider changing it.
NGK Spark Plugs			One range cooler plugs and gapped to .032".
TDR Heat Shield			Keeps header/exhaust manifold heat away from the supercharger and intake area.
Magnacore 8mm Wires			Consider replacing the stock wires if the originals have more than 30K miles or 2 years old.
5W30 Red Line Synthetic Oil			You should be using synthetic oil. This becomes more important when you add forced induction to your motor.
Red Line Transmission and Differential Fluid			You'll be stressing your drivetrain with increased torque so using synthetic products like Red Line are recommended.
Oil Filter			WIX filters are a good alternative to OEM filters.
Radiator Fluid			Flush the radiator fluid and reduce the mixture to 70% water and 30% radiator fluid (in frost-free weather conditions only). It's a good time to check the thermostat, radiator cap and all hoses. Replace if necessary
Brake Pads			With the increased power you'll need increased braking power. Aggressive street pads are an inexpensive upgrade.
Heavy Duty Motor Mounts			Most OEM mounts failed within a few months of installing a supercharger. We strongly recommend replacing
Cat Back Exhaust			Eliminates unnecessary backpressure.
Gauges			We recommend Boost, Air/Fuel and Temperature gauges. We sell a full line of gauges and can order almost any combination.
Over 190 RWHP and 170 lb./ft. Torque (including all the items above)
ACT Stage 1 Clutch			Install your new clutch and/or flywheel before you installed supercharger if you have a header in place.
Lighten Flywheel			Not mandatory but a worthwhile consideration when changing the clutch.
Performance Header			Must be installed before supercharger is in place.
PWR Aluminum Radiator			Mandatory with TDR Air-to-Air Intercooler. Recommended with PWR Water-to-Air Intercooler
Polished Hood Lift			Mandatory with TDR Air-to-Air Intercooler
Supercharger Drive Belt			Don't be caught without a spare.
Oil Catch Can			Collects blow-by oil from valve cover.

How do I select a supercharger system?

Recommended Upgrades

Track Dog Racing FAQ

FAQ

Selecting a Supercharger

JR M45 Supercharger

Moss MP62 Supercharger

Intercooler Info

Dyno Runs

Supercharger Upgrade Checklist

High Performance Radiators

Pulley RPM chart

Heat Shields: Testimonials

	Home \| About Us \| Contact Us \| My Account \| Shipping Policy \| Privacy Policy \| Sitemap \| Cart Help
©2003-2009 Track Dog Racing. All rights reserved.